HOW TO USE A PT/INR MACHINE AT HOME ?
The Prothrombin (PT/INR) tests are done to evaluate blood clotting. This is necessary for people who are taking the blood thinning medication WARFARIN or COUMADIN. inr test meters at home They are often required to monitor their INR level and report to their Health care providers according to their health conditions.
This usually involves visiting a doctor’s office or a lab on a regular basis to have a blood test. pt inr home monitoring system However, there is another more convenient option to test your blood by using a PATIENT SELF TESTING KIT at home.
it is a very easy monitor to use, as shown below.
1. pt inr test meter First you should familiarize yourself with the monitor and read very carefully all operating instructions.
2. Keep all materials in front of you including all the materials provided in the kit such as Meter, test strips etc.
3. Switch ON your Monitor. It will state: warfarin inr test meters READY INSERT STRIP. Then; insert a test strip into the device.
4. The monitor will warm up the strip to room temperature and check the bar-code on the strip. This takes a few seconds.
5. Then the monitor will start counting down backwards from 20 to zero. After the monitor finishes counting down backwards it will beep and a GREEN light will appear on the strip and the monitor will state APPLY SAMPLE.
6. No
w you are ready to prick the side of the fingertip (Always AFTER the green light appears – NOT BEFORE).
7. Next; collect the blood sample by using the transfer tube. Anticoagulation Machine Make sure the blood fills up to the white dot in the tube – to ensure an adequate sample.
8. Then; apply the blood on the targeted area of the test strip (blinking GREEN Light). This is accomplished by pressing on the black plunger on the transfer tube.
9. The monitor will state TESTING PLEASE WAIT and in less than a minute both the PT and INR test results will appear.
10. Call in your test result via the toll free phone number or enter results via the WEB site.
11. Dispose of the test strip, switch off your monitor and pack it away. home inr testing It’s that simple!
Comments
Post a Comment